RJ-11 Connectors

RJ-11 connector wiring arrangement is typical of two types-Suojakilvettömien Twisted Pair, also known as UTP or kiertämätön, fixed satin cable. In General, it is known, is mostly widely used registered jacks, very likely caused by the fact that almost all telephone jacks, regardless of the number of offices and dwellings in North America and other land solo line (POTS) shall apply to the use of such a connector. No other similar connectors RJ-25-3-line in jack, RJ-14-2-line jacks suitably bio-chemical and RJ-61, in particular use only 4-line phone jacks.

In principle, this type of RJ connector uses only 2 6 yarn combined positions, thus enabling 6P2C modular jack, which take six positions and ran out of two conductors.But these jacks rarely on the market than to six points and four in the context of the junction box and if the two are just the unused wires come in kind, the majority of the jacks 6P4C. of course, add two wires can be used in a variety of other applications, such as Inhibiting pulse-dial telephone, and the identification of the bells ringing tones, powering LED ring indicator that acts as a Ringer signal and many others.

Full powered up state number of pins 5, has a yellow or orange color and number of pins required for memory slots 2 black or white RJ-11 connector may have DC or low voltage AC power sources is a key power transformer that is associated with a close to jack, which gives the power to each single jack also in connection with the dwelling.But most of the time, the phone line is not the direct supply of power to the terminals of the phone.

When I saw the phone terminals, which are equipped with glow lights, for example, Trimline phone and Western Electric Princess old phone; they may require more energy than a standard telephone line delivered. It also depends on whether the RJ connector is old or new color code off; negative terminal should be colored red or blue and positive should be able to see either a green or white.