I found that most to promote software companies, how easy it is to move the VHS tapes TO DVD, when their software to do so. Even if their products to make this process very easy, I found the final video DVD is worse than the original VHS cassette. After several common VHS DVD product, you can try I became blank, that I may be achieved by the original VHS tape with the original video quality. DVD-VHS-tapes technology exceeds by long shot and in my mind there is no reason why it should be after the transfer of any kind with respect to the quality video and degeneration. After much trial and error and hundreds hours spent I wrote this article. This article examines the three (3) of the popular software products and provides a method to convert VHS tapes TO DVD at the same time achieve a little video quality final DVD, any degeneration.
Tested for direct support schemes under the common Software products:
Three (3) the programmes had tried:
1. the Roxio VHS TO DVD
2. Homestech 4.0 DVD
3. the Pinnacle Systems-Dazzle DVD recorder
In the light of the above software packages were the most popular and seemed very attractive one to get the work done. They were available on the local computer stores and the most popular software packages were also found within Internet search engines. In the light of the above software packages to use small USB device, which allows connecting your computer to your VCR.THE UNIVERSAL SERIAL BUS (USB) device converts an analog signal to digital before they are sent to your computer.Each of the three (3) the product produced by the final DVD was less then the original VHS video quality.Each package comes with the software correctly installed and worked fine. [1] [2] Pinnacle Systems-product is not accompanied by a driver of their website did not. [1] [2] drivers. Several hours after I could not get the Pinnacle product work at all.2 other products were returned to the video quality is much smaller than the original VHS tapes. it was found that the small USB devices produced by the digital signal, was the main reason for the final DVD are of poor quality. It was also found that the software in each of the packages shall also contribute to the final DVD video quality then VHS tapes.
Final VHS TO DVD-process use:
When you have to try and come back then, for each of the above software, I spent many hours researching this I managed to talk to the task. Some experts from the video and read hundreds of posts in the Forum Converts DVD'S ... with a little video quality is not the final process of degeneration was:
1. use the Canopus ADVC-300 Advanced Digital Video Converter converts the VCR output to a digital format.The unit needs to have a FireWire connection on your computer.
2. the Use of free software, called the "Win A DIGITAL VIDEO (DV)" digital video (DV) and creates AVI files on your hard disk.AVI-files only to capture digital video software captures.No software available that captures THE MPEG files directly, which is what you'll need A DVD.other file conversion is needed.
3. use the "Canopus Procoder 3" you can share your audio files to WAV and AVI files into video M2V.
4. by using "TMPGEnc MPEG Editor" M2V video files in a mail merge and WAV MPEG files.
5. use the "TMPGEnc MPEG Editor" cut and delete parts of the MPEG files as necessary.
6. using the "TMPGEnc MPEG Editor" and creates the final DVD
Canopus ADVC-300 is the design of the unit for converting digital signals in analog VCRs.It is designed to be a common noise, which can be found on the video tape before it encodes digital signal to filter out the several predefined filters. even if the trial and error I have tried all combinations of these filters settings. these filters, improving not made a final DVD quality filter left ghost. 3D objects behind the camera as image on the move.the 2D filter and y/c separation had effect at all. my last DVD has created all filters that have been disabled. Although not using filters, it is highly recommended that all try all combinations of filters for each of their tapes. each VCR recording has its own unique noise feature a combination of the filter settings. one does not work with all of the Strip so you want to experiment with these filters.
Procoder output settings for the file were:
1. the Quality/Speed: the print quality
2. type: variable Bitrate (VBR) rate
3. the number of Passes: 2 pass.
4. the video bitrate: 4500 kb/s
5. Max.Bitrate: 7000 kb/s
6. Min bitrate: 2000 KB/sec
By adding these numbers can be made to the final DVD, non-standard compliant.
Why many of today's most popular programs degrade the original video quality?This requires information about each process involved during conversion:
1. Convert the original signal analog digital.
2. Encode and create a file in a digital signal.
3. convert your file to a MPEG file format.
4. Convert VOB files to THE MPEG-file for use in the final DVD.
Each time coding or conversion process "codec" is necessary. codec (compressor/decompressor) is a term that can be best described as that of an interpreter between two different native language interpreters. most embellishment. This Accent is they will be interpreted as its language interpreters ' own degeneration. Some interpreters is heavy accents than others. very few interpreters is not Accent. Since the VHS tape conversion DVD cover several interpretation or modification, the opportunity to always be present at the degeneration. conversion process needs to be programmed by software developer Less accent or degeneration. [1] [2], the more time there is no need for knowledge and skill as a programmer, which creates codecs for each software programs on behalf of the three (3) of the software programs were tested and returned to pay around $ 50.00. developers are not going to spend too much resources on Costing this software limited.
So how does one know what the software is to convert best? they are not needed. [1] [2] the only way is through the long, timely and frustrating trial and error. [1] [2] the author of this article went even if the trial and Error processing Forum post of the month and many of the experts. "resolution" section of this article is intended to give you a way to convert VHS tapes TO DVD-quality, while at the same time with the complete in time for bringing an action before the sparing nearby and error.
Final cost:
Even if they cost about $ 50.00 USD, for a period of three (3) software packages tested earlier in this article, is a poor conversion and are not worth using, if you are trying to achieve the highest quality VHS tapes of the shift to a digital format, DVD or Blu-Ray. [1] [2] I have bought the ADVC-300-converter, Procoder and a total of around $ 550 TMPgenic. 00 eBay software. After All of the tapes have been converted to ADVC-300 and the net cost of the software was sold to eBay and was around $ 120.00. even though the hardware and software, including, but not limited to direct costs-desirable final cost is also made to the best of the old video tape TO DVD quality.
Canopus ADVC-300 digital-analog-converter is likely to be, you need the most pricey item. If you do not have a good idea to reserve, you may want to use the cheaper Canopus ADVC-55 or Canopus ADVC-110 analog digital converter you can all use the ADVC-units in the transition to the digital signal on analog in the exact same algorithm. ADVC-300-unit is the noise filter controls, which are designed to filter the tape to digital signal noise prior to encoding. I have tried all combinations of these filters and find them useless. ADVC-110 or ADVC-55 gives me the same results., you can view the reviews, and View demonstrations of Canopus analog digital converter products including Canopus Reviews here.
0 comments:
Post a Comment